🔴 Showroom closed
🔴 Showroom closed
🔴 Showroom closed
New

Available at short notice – usually 6–8 weeks (please enquire about the exact delivery time)

XYZ RMX 2500

ProtoTRAK Maximum table load: 600 kg XYZ travel: 762 x 381 x 560 mm Table: 1245 x 228 mm

Item: XYZ02-0004

Share

Features
ProtoTRAK RMX-besturing

ProtoTRAK RMX controller

The ProtoTRAK RMX control system combines the simplicity of manual operation with the capabilities of CNC. Thanks to its intuitive controls, you can programme quickly directly on the machine, without the need for extensive CNC knowledge. Ideal for one-off parts, prototypes and small batches, where flexibility and short programming times are key. This allows you to retain the control of a conventional milling machine, whilst enjoying the productivity of CNC.

TRAKing® Elektronische handwielen

TRAKing® Electronic Handwheels

Before you press ‘Start’, you can activate the TRAKing function. This gives you full control over the handwheels. The X and Z axes follow the toolpath at the speed at which you turn the handwheels. This means you can stop at any time, or even reverse the direction. You’re in control, not the CNC.

Geharde, verchroomde geleidingen

Hardened, chrome-plated guides

The hardened, chrome-plated guide rails ensure durable and precise machine movement. The hardened surfaces offer high wear resistance, whilst the chrome coating contributes to smooth movement and a long service life. The result is consistent accuracy, reduced wear and reliable performance, even under intensive use.

Boorpinole

Drill quill

Nothing beats the feel of a manual drill chuck for precision drilling work. Thanks to the clever integration of the DRO onto the spindle and the Z-axis of the milling head, you can always read an accurate measurement!

Precisie geslepen kogelomloopspindels

Precision-ground ball screws

The ball screws ensure accurate and smooth positioning of the machine axes. Thanks to their low friction and minimal play, movements are transmitted quickly and precisely. This results in high positioning accuracy, reliable repeatability and reduced wear, even with intensive daily use.

Uitvoerige controle

Thorough inspection

Precision is not achieved by chance. The extensive testing your machine undergoes ensures tight tolerances and durability. Every XYZ RMX milling machine undergoes the Renishaw Ballbar test and is delivered with high precision.

Interlocked Guarding

Interlocked Guarding

The clever design of the enclosed safety guards ensures a chip-free environment around the machine. The fully CE-compliant guards are powder-coated for optimum durability. The double sliding doors provide enough space to load larger workpieces onto the machine, whilst ensuring that the coolant stays where it’s needed.

Gereedschapspad

Tool path

The aim of ProtoTRAK is to get you machining as quickly as possible. No faffing about with codes or complex dialogue boxes. As you enter the required details, the drawing takes shape. ProtoTRAK even allows you to estimate a dimension or select one directly on the screen.

Product details

Main motor: 2.2 kW (3 pk)
Spindle speeds: 40–4,200 (variable)
2-speed range: 40–600 / 300–4,200 rpm
Table dimensions: 1245 x 228 mm
T-slots: 3 (M14)
Longitudinal travel x: 762 mm
Lateral displacement y: 381 mm
Vertical travel z: 560 mm
Spindle mount: R8 / SK30 (optional)
Automatic feed of drill quill: .038 / .076 / .15 mm per revolution
Drill chuck diameter: 127 mm
Drill quill diameter: 85.7 mm
Table load capacity: 600 kg
Head swivels left and right: 45° / -45°
Distance from spindle to column: 460 mm
Net weight: 1,900 kg

  • Free one-day training course for up to three people in Maldegem. You don’t need to know anything about CNC; a basic understanding of conventional machining is sufficient.
  • Free installation and fitting of the machine
  • 4-axis digital display
  • Programmable 3-axis CNC
  • Programmable spindle speed (VC or RPM)
  • Chiller system
  • Machine lamp
  • Fully automatic lubrication
  • Hardened and ground guideways and ball screws
  • Protective cover on the table
  • In accordance with all safety standards
  • Braked main spindle
  • Compressed-air tool drive
Options

TRAKing®: run through your programme using the handwheels

Offline software

Transport of the machine and installation at the workplace.

SK30 spindle mount instead of R8

Advanced options

DXF Converter

Parasolid converter

Machine clamp

Collet holder and milling cutters

Angle milling head

Training at your premises (1-day free training course in Maldegem included as standard)

Remote control start/stop

254 mm or 125 mm shim block for increased clearance between the spindle and the table

‍ The protective caps have been removed for the photo in some of the pictures

Discover why ProtoTRAK machines are so unique

Save time and effort! With ProtoTRAK, you can effortlessly turn or mill your workpieces without any programming knowledge. Whether you run a maintenance workshop, carry out one-off jobs or produce small batches, ProtoTRAK can handle it all.

Get your free ProtoTRAK catalogue

Find out why ProtoTRAK is ideal for one-off parts, prototypes and small batches: fast machining without complex CNC code, intuitive operation, safe manual control via TRAKing, and compatibility with DXF and G-code. Fill in the form to receive the catalogue.

cataloog XYZ machines

Come and see our machines in our showroom!

We’re delighted to demonstrate our machines here and would be happy to discuss all the options with you.

Opening hours

Monday
8.00 am – 5.00 pm
Tuesday
8.00 am – 5.00 pm
Wednesday
8.00 am – 5.00 pm
Thursday
8.00 am – 5.00 pm
Friday
8.00 am – 5.00 pm
Saturday
By appointment
Sunday
Closed

Are you travelling from far away, or would you like to see a demonstration or a machine at a specific time?

Discover our
other machines

We’re here to help you with the XYZ RMX 2500

Fill in the form below and receive a bespoke quote

Do you have any questions about our products? Give us a call! Our sales and service team are on hand to answer them.

+32 (0)50 71 51 72

You can contact us by telephone:

  • Monday to Friday: 08:00–17:00
🔴 Showroom closed

Opening hours

Monday
8.00 am – 5.00 pm
Tuesday
8.00 am – 5.00 pm
Wednesday
8.00 am – 5.00 pm
Thursday
8.00 am – 5.00 pm
Friday
8.00 am – 5.00 pm
Saturday
By appointment
Would you like some advice from one of our advisers?

Please get in touch with us. We are available by telephone from Monday to Friday, from 9.00 to 18.00, on the following number +32 (0)50 71 52 72. At other times, you can also contact us by email at in**@*****yn.be

situation 3
XYZ RMX 2500
THURSDAY 29 OCTOBER · 8 am–8 pm

Crispyn Experience Day

Discover, experience and learn!

Live demonstrations, the latest metalworking machinery and practical insights from manufacturers and specialists.

Visit our 5,500 m² showroom in Maldegem and discover what new technology can do for your workshop.
29 October, from 8 am to 8 pm